The car front and rear shock absorber core (also known as shock absorber cartridge) is the core functional part of the vehicle’s suspension system, installed inside the shock absorber assembly. It works with coil springs to dampen the impact and vibration generated when the vehicle passes over uneven roads, speed bumps, or potholes.
Its core working principle is to convert the kinetic energy of vehicle jolting into thermal energy through the reciprocating movement of the internal piston and hydraulic oil, then dissipate it into the air. This process effectively reduces the up-and-down bouncing of the vehicle body, ensures the tires stay in close contact with the road surface at all times, and improves driving stability, handling, and ride comfort. The front shock absorber core bears more load due to the engine weight, while the rear one focuses on balancing the rear body weight and passenger load.
This component is suitable for most mainstream vehicle models, with customized versions for Chery, Jetour, and iCAR series to match their original suspension specifications.
High-Strength Hydraulic Structure for Stable PerformanceThe shock absorber core adopts a double-tube hydraulic design (or single-tube gas pressure design for high-performance models). The inner tube is made of high-precision seamless steel pipe, with a chrome-plated piston rod that has excellent wear resistance and corrosion resistance, preventing rust and jamming during reciprocating movement. The internal hydraulic oil has high viscosity stability, maintaining consistent damping force in extreme temperatures (-40°C to 120°C), avoiding softening in high temperatures or hardening in low temperatures.
Multi-Stage Damping Adjustment for Adaptive DrivingHigh-quality shock absorber cores are equipped with multi-stage damping valve structures. They automatically adjust the damping force according to the vehicle’s driving speed and road conditions: providing soft damping for slow driving on rough roads to improve comfort; switching to hard damping for high-speed driving or sharp turns to enhance body stability and prevent rollover.
Durable & Leak-Proof DesignThe seal between the piston rod and the cylinder tube uses a high-quality nitrile rubber oil seal with a dust cover, effectively preventing hydraulic oil leakage and dust from entering the core. The welding process of the cylinder tube is precise and firm, avoiding cracking under high pressure. The product undergoes strict pressure testing and fatigue testing, with a service life of up to 50,000 kilometers under normal use.
Direct Replacement & Easy InstallationThe shock absorber core is designed to be OE-spec compatible, with dimensions and mounting interfaces fully matching the original shock absorber assembly. It can be directly replaced without modifying the suspension system or welding. Professional technicians can complete the installation with common tools (socket wrenches, spring compressors) in a short time, restoring the vehicle’s original ride quality.
Installation Preparation
Park the vehicle on a flat surface, turn off the engine, and engage the parking brake. Use a jack to lift the vehicle and secure it with jack stands for safety.
Remove the wheel to expose the shock absorber assembly. Prepare tools: spring compressor, socket wrench set, torque wrench.
Installation Steps
Disconnect the upper and lower mounting bolts of the shock absorber assembly, and remove the assembly from the vehicle.
Use a spring compressor to compress the coil spring to release the pressure on the shock absorber core.
Remove the top nut of the assembly, take out the old shock absorber core, and replace it with the new one.
Reassemble the shock absorber assembly, install it back to the vehicle, and tighten all bolts to the specified torque.
Reinstall the wheel, lower the vehicle, and test drive to check for abnormal noise or unstable damping.
Usage Notes
Replace shock absorber cores in pairs (front left/right or rear left/right) to ensure balanced damping force and avoid uneven vehicle jolting.
Do not use a spring compressor improperly to prevent spring rebound and personal injury.
Regularly inspect the shock absorber core for oil leakage, abnormal noise, or loose mounting bolts; replace it promptly if faults are found.
This front and rear shock absorber core offers OE-spec customized versions for Chery, Jetour, and iCAR series (including Arrizo, Tiggo, iCAR 03 models). Universal versions are also available for mainstream passenger cars and SUVs. When purchasing, please confirm the vehicle model, year, and suspension type (MacPherson/ multi-link) to ensure a perfect match.