
| Vehicle Model | Engine Type | OEM Part Number | Spark Plug Model |
|---|---|---|---|
| Chery QQ | 472 gasoline engine | A11 - 3707110 | Torch K7RTC (Copper Core) |
| Chery Tiggo 3 | SQR481/SQR484 gasoline engines | A113707110CA | Champion RER8WMB (Single Platinum) |
| Jetour X70 | 1.5T/1.6L gasoline engines | A113707110CA | NGK ILZKR7B - 11S (Iridium - Platinum) |
Fitment: Direct OEM replacement, matching original mounting positions and plug connections
Installation: Plug - and - play, no modification or wiring required, simple and quick to install
Electrode Material: Iridium - platinum/nickel - copper alloy, ensuring stable spark and long - lasting durability
Insulator: High - purity alumina ceramic, with excellent insulation and heat - resistance (up to 1800°C)
Shell: Cold - rolled steel with anti - rust coating, providing strong sealing and corrosion resistance
Sealing Washer: High - temperature resistant rubber, preventing air leakage and oil seepage
Quality Assurance: 100% tested for spark performance, insulation, and heat resistance before delivery
Disconnect the negative terminal of the car battery and let the engine cool down completely.
Remove the engine decorative cover and unplug the electrical connector of the ignition coil.
Unscrew the fixing bolts of the ignition coil, then gently pull out the ignition coil.
Use a spark plug socket wrench to remove the old spark plug in a counter - clockwise direction.
Check the gap of the new spark plug (0.8-1.1 mm), apply a thin layer of anti - seize compound on the thread, and then install it by hand to avoid thread damage.
Tighten the new spark plug to the specified torque (20-25 N·m) with a torque wrench.
Reinstall the ignition coil, connect the electrical connector, put back the engine decorative cover, and reconnect the battery terminal.
Start the engine to check for normal operation without abnormal noise or misfiring.
4 x Original Spark Plugs (1 set for 4 - cylinder engines)
1 x English Installation Manual