Car Rear Fog Light Assembly: High-Visibility Safety Component for Vehicle Rear End

share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
$225.00
130000000
Reservation Now
Detail

Core Function & Product Overview

The car rear fog light assembly is a dedicated safety lighting component mounted on the rear bumper or tail light cluster of vehicles. Its core function is to emit strong, penetrating red light to enhance the vehicle’s visibility in low-visibility conditions such as fog, rain, snow, or heavy dust. Unlike brake lights or running lights, rear fog lights have a higher brightness and a more concentrated light beam, which can warn following vehicles of the car’s position and distance from a longer distance, reducing the risk of rear-end collisions.
This assembly integrates the lamp housing, lamp holder, bulb (or LED chip), and wiring harness into a complete unit, designed to be a direct replacement for the original factory part. It is widely applicable to mainstream vehicle models, with customized OE-spec versions available for Chery, Jetour, and iCAR series to match their rear bumper design and electrical system specifications.

Product Features & Advantages

  1. High-Penetration Light Source for Reliable Warning

    The assembly is available in two light source options to meet different needs:


  • Halogen Version: Equipped with high-lumen halogen bulbs, it produces warm red light with strong penetration, suitable for various harsh weather conditions. The bulb has a long service life and low replacement cost.

  • LED Version: Adopts energy-saving LED chips with instant-on response, low power consumption, and a service life of up to 50,000 hours. The LED light beam is more concentrated and uniform, with a faster warning effect for following vehicles.

    Both versions comply with international automotive lighting standards, ensuring the light intensity meets safety requirements without causing glare to other drivers.


  1. Durable & Weatherproof Housing DesignThe lamp housing is made of high-strength PC (polycarbonate) material with scratch-resistant and UV-resistant coating, which can resist the impact of small stones and debris during driving, and prevent yellowing or cracking caused by long-term exposure to sunlight. The assembly features a fully sealed structure with a high-quality rubber gasket around the mounting edge, effectively preventing water, dust, and moisture from entering the lamp cavity, and ensuring stable operation even in heavy rain or humid environments.
  2. OE-Spec Custom Fit & Plug-and-Play InstallationEngineered with 1:1 scanning data of the original vehicle’s rear bumper mounting position, the assembly matches the shape, size, and mounting holes of the original part perfectly. The wiring harness is designed with a plug-and-play connector that is fully compatible with the vehicle’s original electrical system—no cutting, splicing, or rewiring is required. DIY enthusiasts or professional technicians can complete the replacement in 20–30 minutes: just remove the old assembly by loosening the fixing screws, connect the new assembly’s plug to the vehicle’s wiring harness, and secure it with screws.
  3. Impact-Resistant & Long-Lasting PerformanceThe lamp housing has a reinforced rib structure that enhances its impact resistance, reducing damage caused by minor collisions. The internal circuit board is coated with anti-corrosion material to prevent short circuits caused by moisture or corrosion. The product undergoes strict high-temperature, low-temperature, and vibration tests to ensure stable performance in extreme driving conditions, with a service life far exceeding that of ordinary aftermarket parts.

Installation & Usage Guidelines

  1. Installation Preparation
    • Park the vehicle on a flat surface, turn off the engine, and disconnect the negative battery cable to avoid electrical short circuits.

    • Locate the rear fog light assembly (usually on the left and right sides of the rear bumper).

    • Prepare tools: socket wrench, screwdriver, and plastic pry bar (to remove the bumper trim if necessary).

  2. Installation Steps
    • Remove the fixing screws or clips that secure the old fog light assembly, then disconnect the wiring harness plug.

    • Take out the old assembly and clean the mounting surface to remove dust and debris.

    • Connect the new assembly’s wiring harness plug to the vehicle’s original plug, then align the assembly with the mounting holes and tighten the fixing screws.

    • Reconnect the negative battery cable, start the engine, and turn on the rear fog light switch to test whether the light works normally.

  3. Usage Notes
    • Use the rear fog light only in low-visibility conditions; do not turn it on in clear weather to avoid dazzling following drivers.

    • Regularly check the assembly for cracks, water ingress, or bulb burnout; replace damaged parts promptly.

    • When replacing the bulb, ensure the engine is turned off and the bulb is cool to avoid burns.

Compatibility Statement

This rear fog light assembly offers OE-spec customized versions for Chery, Jetour, and iCAR series (including Tiggo 8 Pro, Jetour X70, iCAR 03 models). Universal versions are also available for mainstream sedans, SUVs, and hatchbacks. When purchasing, please confirm the vehicle model, production year, and original fog light shape to ensure a perfect match.


Phone
+86-18949559480
Wechat
Wechat
whatsapp
whatsapp