Oil Filtration: Captures metal shavings, sludge, carbon deposits, and other solid impurities generated during the transmission’s operation, preventing these contaminants from circulating in the hydraulic system and causing wear to clutch plates, gear sets, and valve bodies.
Oil Quality Maintenance: Maintains the cleanliness of the transmission fluid (DCTF), ensuring stable fluid viscosity and lubrication performance, which is crucial for smooth gear shifting, reduced transmission noise, and prevention of overheating.
High-Efficiency Filtration Media
The filter adopts a multi-layer composite filter paper imported from premium suppliers, with the following performance advantages:Precise Filtration Accuracy: The filtration rating reaches 20–25 microns, capable of trapping even tiny metal particles that could damage precision transmission components.
Strong Dirt-Holding Capacity: The pleated filter paper design increases the filtration area, allowing the filter to hold more impurities before needing replacement, extending the service cycle.
Oil-Resistant & High-Temperature Resistant: The filter paper is impregnated with special resin, which maintains structural stability under the high temperature (up to 120°C) and high pressure of the transmission system, avoiding paper rupture or deformation.
Durable Structural Design
Reinforced Metal Frame: The filter paper is supported by a sturdy steel mesh frame, preventing collapse under high oil pressure and ensuring unobstructed oil flow.
High-Quality Sealing Gasket: Equipped with a nitrile rubber (NBR) gasket that has excellent oil resistance and aging resistance. The gasket fits tightly with the oil pan to prevent transmission fluid leakage, avoiding oil loss and system pressure drop.
Integrated Design: The filter combines the filter element and the oil suction port into one piece, which is consistent with the original equipment (OE) design, ensuring easy installation and reliable performance.
OE-Spec Precision & Compatibility
Manufactured to 1:1 OE standards, the filter uses the same dimensions, mounting holes, and connection ports as the original factory part. It is compatible with the following models:Chery Series: Tiggo 8 Plus (7-speed DCT version)
Exeed Series: TX, TXL, VX, Lingyun, Lanyue (7-speed DCT version)
Jetour Series: X70, X90, X95 and other models equipped with 7-speed dual-clutch transmissions
Extended Transmission Service Life
Regular replacement of the transmission filter (recommended every 40,000–60,000 kilometers or 2–3 years) can:Reduce wear of internal transmission components, avoiding gear shifting jolts, slipping, or failure.
Maintain stable hydraulic pressure, ensuring fast and smooth gear changes.
Prevent premature aging of transmission fluid, extending the fluid change interval appropriately and reducing long-term maintenance costs.
Park the vehicle on a flat surface, turn off the engine, and wait for the transmission to cool down completely to avoid burns.
Prepare professional tools: socket wrench set, oil drain pan, torque wrench, and new transmission fluid.
Raise the vehicle with a jack (or use a lift) and secure it with jack stands for safety.
Locate the transmission oil pan, remove the drain plug to drain the old transmission fluid completely.
Remove the oil pan bolts, take off the oil pan, and clean the residual oil and sludge inside the pan.
Remove the old filter from the mounting bracket, clean the bracket surface, and install the new filter with the new sealing gasket.
Reinstall the oil pan and tighten the bolts evenly to the specified torque (refer to the vehicle maintenance manual).
Refill with the recommended type and volume of DCT transmission fluid, start the engine, and check for leaks.
Replace the filter together with the transmission fluid for the best maintenance effect; do not reuse the old fluid.
Ensure the sealing gasket is installed correctly to avoid oil leakage; do not over-tighten the oil pan bolts to prevent cracking.
Use only filters that match the vehicle’s transmission model; incompatible filters may cause oil flow blockage or poor filtration.
©2025 Hefei New Exeed Machinery Technology Co., Ltd. All rights reserved


