They deliver ultra-high brightness output, with a luminous flux up to 3 times that of halogen bulbs, providing a wider and farther lighting range to help drivers detect obstacles, pedestrians, or road signs in advance.
The light color is close to natural daylight (6000K cool white), reducing eye fatigue during long-hour night driving and improving contrast recognition of road surfaces and objects.
They are universally compatible with most vehicle models (including Chery, Exeed, Jetour series) with H1, H4, H7, 9005, 9006 common headlight sockets, and support both high and low beam functions for dual-beam models.
Premium LED Chip & High-Efficiency Lighting
Equipped with top-grade automotive-grade LED chips (CSP or COB technology), the bulbs feature:Instant Brightness: No warm-up time required, achieving full brightness immediately after turning on, eliminating the delay of halogen bulbs and improving response speed in emergency situations.
Stable Performance: Luminous efficiency is up to 120lm/W, with low light decay rate (less than 5% after 5,000 hours of use), ensuring long-term consistent lighting effect.
Wide Voltage Adaptation: Supports 12V-24V wide voltage input, suitable for both gasoline cars and commercial vehicles, with built-in voltage stabilization and surge protection functions to prevent damage from voltage fluctuations.
Durable Heat Dissipation System
To solve the heat accumulation problem of LED lights, the bulbs adopt a dual heat dissipation structure:Aluminum Alloy Heat Sink: The bulb body is made of high-purity aluminum alloy with excellent thermal conductivity, which quickly transfers heat generated by the chips to the external environment.
Turbo Cooling Fan: Built-in high-speed silent fan (rotation speed up to 8,000 RPM) accelerates air circulation, reducing the working temperature of the LED chips, ensuring the bulb works stably at a safe temperature and extending the service life to over 30,000 hours (10 times that of halogen bulbs).
Plug-and-Play Installation & Perfect Fit
The bulbs adopt a 1:1 plug-in design that matches the original halogen bulb interface, requiring no modification, wiring, or decoder for most models:Installation can be completed in 10 minutes: Simply remove the original bulb, insert the LED headlight bulb into the socket, and fix the heat sink to avoid contact with the headlight housing.
For a small number of models with sensitive CAN bus systems, the bulbs are equipped with a built-in CAN bus decoder to prevent error codes or flickering issues, ensuring compatibility.
Energy-Saving & Environmental Protection
The power consumption of each LED headlight bulb is only 30W, which is 50% lower than that of 60W halogen bulbs, reducing the load on the vehicle’s electrical system and saving fuel consumption indirectly.
No mercury, lead, or other harmful substances are contained, and no ultraviolet or infrared radiation is emitted, which is more environmentally friendly and does not damage the headlight housing or lens.
Turn off the vehicle engine and headlights, wait for the original bulbs to cool down completely to avoid burns.
Prepare a screwdriver (if needed) to remove the headlight housing cover or dust cover.
Disconnect the power connector of the original halogen bulb, then remove the bulb from the headlight housing.
Align the LED bulb’s plug with the power connector and insert it firmly; ensure the bulb’s luminous surface faces left and right (not up and down) to get the correct light pattern.
Fix the heat sink and fan to a position where they do not touch the headlight housing or other components, then reinstall the dust cover.
Turn on the headlights to test the high and low beam functions and adjust the light height if necessary.
Do not touch the LED chip surface with bare hands, as finger oil will cause localized overheating and damage the chip.
Ensure the dust cover is sealed tightly after installation to prevent water or dust from entering the headlight housing and causing fogging.
Do not use the LED headlights in high-temperature environments for a long time; if the fan stops working, replace the bulb immediately to avoid chip burnout.
©2025 Hefei New Exeed Machinery Technology Co., Ltd. All rights reserved



