Daytime Running Lights: Automatically activate when the vehicle is on, improving the car’s visibility during daytime driving and reducing the risk of rear-end or side collision accidents.
Front Fog Lights: Provide high-penetration illumination in foggy, rainy, or snowy weather, cutting through thick fog to illuminate the road ahead and enhance driving safety in low-visibility conditions.
Turn Signals: Feature a dynamic sequential flashing effect, which is brighter and more eye-catching than the original halogen turn signals, effectively warning surrounding vehicles and pedestrians of the vehicle’s turning intention.
High-Brightness LED Chips & Energy-Saving Performance
Premium LED Light Source: Adopts high-power SMD LED chips with a color temperature of 6000K (pure white) for DRL and 3000K (warm yellow) for fog lights/turn signals, delivering bright, uniform illumination with no dark spots or glare.
Energy Efficiency: Consumes only 15W per light (far lower than 55W halogen lamps), reducing the load on the vehicle’s alternator and saving fuel consumption while maintaining longer service life (up to 50,000 hours).
Fast Response Speed: LED lights reach full brightness instantly (within 0.1 seconds), which is faster than halogen lamps, giving surrounding drivers more reaction time when the turn signal is activated.
Durable Construction & Weatherproof Design
High-Quality Housing: Made of ABS engineering plastic with UV-resistant coating, which is scratch-resistant, fade-resistant, and able to withstand long-term exposure to sunlight without yellowing or cracking.
IP67 Waterproof Rating: The lamp body is fully sealed with high-quality silicone gaskets, preventing water, dust, and mud from entering the interior, ensuring stable operation in heavy rain, snow, or off-road driving conditions.
Heat Dissipation Optimization: Built-in aluminum alloy heat sink at the back of the lamp body, which quickly dissipates heat generated by LED chips, avoiding overheating and prolonging the service life of the light source.
Plug-and-Play Installation & Perfect Fit
1:1 Bumper Matching: The lamp shape is designed according to the original front bumper’s mounting position of Chery Tiggo 9, with precise size and contour, ensuring seamless fit without gaps or protrusions after installation.
No Modification Required: The included wiring harness is equipped with original-style connectors, which directly plug into the vehicle’s original fog light/turn signal sockets. The DRL is connected to the ACC power supply, automatically turning on/off with the vehicle.
Easy Installation Process: The kit comes with detailed installation instructions and necessary mounting brackets. Professional installation can be completed in 1–2 hours, or DIY installation by experienced car owners with basic tools.
Dynamic Lighting Effect & Customizable Style
Sequential Turn Signal: When the turn signal is activated, the LED lights flash sequentially from the inside to the outside, creating a trendy dynamic effect that enhances the vehicle’s visual appeal.
Dual-Mode DRL: Supports normal constant-on mode and breathing flash mode (optional), allowing users to switch according to personal preferences to match different driving scenarios.
OEM-Level Appearance: The light color and brightness are calibrated to match the original headlight’s style, ensuring a coordinated and premium look for the front of the vehicle.
Park the vehicle on a flat surface, turn off the engine, and disconnect the negative battery terminal to prevent electrical short circuits.
Prepare tools including a screwdriver set, trim removal tool, and wire stripper (if needed).
Check the kit contents: 2 LED light units, 1 wiring harness, mounting brackets, screws, and installation instructions.
Use the trim removal tool to gently pry off the blank cover or original halogen lamp from the front bumper.
Take out the new LED light unit, install it into the bumper mounting slot, and fix it with the included brackets and screws.
Connect the wiring harness of the LED light to the original vehicle’s corresponding socket (follow the instruction manual to distinguish DRL, fog light, and turn signal wires).
Reconnect the negative battery terminal, start the vehicle, and test the functions of DRL, fog light, and turn signal to ensure normal operation.
Adjust the light angle if necessary to avoid glare affecting oncoming vehicles.
Do not use the fog lights as daytime running lights for a long time, as the warm yellow light may affect the vehicle’s visibility in bright daylight.
Regularly check the wiring harness connection and lamp body fixing screws to prevent loosening caused by vehicle vibration.
Avoid using high-pressure water to directly wash the lamp surface at close range, which may damage the lamp coating or waterproof seal.
Product Browser Title
Chery Tiggo 9 LED DRL Kit - Front Bumper Fog Light & Dynamic Turn Signal Upgrade AccessoryProduct Detail Keywords
Chery Tiggo 9 LED DRL, Front Bumper Fog Light, Dynamic Turn Signal, Auto Lighting UpgradeProduct Detail Description (58 characters)
Custom-fit LED light kit—dynamic turn signal, IP67 waterproof, plug-and-play for Chery Tiggo 9
©2025 Hefei New Exeed Machinery Technology Co., Ltd. All rights reserved



