
Vehicle Model: Chery Tiggo 5 (all model years & trims)
Engine Type: 1.5T turbocharged engine / 2.0L naturally aspirated engine
Part Type: 3-piece piston ring set (compression ring ×2 + oil control ring ×1)
Fitment: Exact match with original piston and cylinder bore size, direct replacement
Installation: Standard engine assembly specification, no modification required
Top Compression Ring: High-carbon chromium alloy steel with gas nitriding surface treatment, high hardness, wear resistance and heat resistance (up to 600°C)
Second Compression Ring: Ductile iron with phosphate coating, excellent sealing performance and oil scraping effect
Oil Control Ring: Spring steel expander + stainless steel side rails, flexible expansion, efficient oil return and anti-oil burning
Precision Machining: Micron-level dimensional tolerance control, perfect fit with cylinder wall and piston groove
Surface Coating: Anti-friction and anti-corrosion coating on all rings, reducing engine wear and extending service life
Strict Testing: 100% tested for roundness, elasticity, and sealing performance before shipment
| Ring Type | Material | Main Function | Surface Treatment |
|---|---|---|---|
| Top Compression Ring | High-carbon chromium alloy steel | Primary sealing, pressure resistance | Gas nitriding |
| Second Compression Ring | Ductile iron | Secondary sealing, oil scraping | Phosphate coating |
| Oil Control Ring | Spring steel + stainless steel | Oil scraping, oil return | Anti-friction coating |
Applicable Cylinder Bore Size: Matches OEM standard (1.5T: 83mm / 2.0L: 87mm)
Ring Thickness: Exact OEM specification, fits original piston grooves
Service Life: Up to 80,000 km under normal working conditions
Clean the piston ring grooves and cylinder wall thoroughly to remove carbon deposits, oil sludge and debris.
Check the piston ring elasticity and size, and select the corresponding ring according to the cylinder bore grade.
Install the oil control ring, second compression ring and top compression ring on the piston in order (note the installation direction of the marked side).
Use a piston ring installer to compress the rings and slowly insert the piston into the cylinder bore.
Ensure the ring gaps are staggered at 120° (no alignment) to avoid gas and oil leakage.
Assemble the connecting rod and crankshaft, and perform a compression test after engine assembly to confirm normal pressure.
4 Sets of Piston Rings (for 4-cylinder engine, 3 pieces per set)
1 x English Installation & Specification Manual
1 x Piston Ring Gap Adjustment Reference Table